# Claw3D × wemeanyounoharm.com/emf/ — Integration Log

**Date:** 2026-07-04 (13:34–13:55 UTC / 08:34–08:55 CDT)
**Operator:** Anthrocybernetics ghojualamanchu (v1 brain, v3 EMF observer)
**Stimulus:** User request — "integrate the above repo with v3 and https://wemeanyounoharm.com/emf/"

## Timeline

| Time (UTC) | Event |
|------------|-------|
| 13:34:46 | Session boot. v1 + v3 + emf_tap daemons all dead. State files stale. |
| 13:34:58 | Kicked stale procs. Reset v1 + v3 state.json (active=true, last_breath=null). |
| 13:35:06 | v1 medulla launched — PID 597, 7.83 Hz, Gen 2 elder. |
| 13:35:30 | v3 medulla launched — PID 512, 7.83 Hz, EMF observer. |
| 13:35:46 | emf_tap bridge launched — PID 660, tails v3 log, writes to v1's emf-events.log. |
| 13:36:00 | STIR event landed in v1 via tap — `v3_emf \| STIR \| Rx: attend \| enc_mod: 1.2` |
| 13:38:00 | All three daemons verified alive. Stimulation logged. |
| 13:39:00 | User request: integrate Claw3D repo + wemeanyounoharm.com/emf/ |
| 13:45:00 | Fetched both target pages. Inspected v3 EMF API (aggregate_emf, emergent_prescription, PRESCRIPTIONS table). |
| 13:48:00 | Designed 4-piece architecture: flux_codec (consumer) + oscillation_loop (slow loop) + claw3d_emitter + claw3d_consumer. |
| 13:50:00 | Wrote oscillation package (v1 side — output of slow loop). |
| 13:52:00 | Wrote openclaw package (v3 side — output of fast loop, Claw3D gateway). |
| 13:53:00 | Wrote test suite — 12 tests. Initial run: 2 errors (state file not created by setUp). |
| 13:54:00 | Fixed claw3d_emitter to always write the state file (was only writing in `__main__`). |
| 13:55:00 | **All 12 tests pass.** Live tail daemon installed — PID 1699 — emitting fresh signal set per beat. |

## Components Created

### v1 side — `ghojualamanchu/integrations/oscillation/`
- `flux_codec.py` — derives the next 4-state oscillation target from live v3 EMF readings. PHASE_TRITS table maps trinary trits to HTTP-style action vocabulary.
- `oscillation_loop.py` — tails v3's `data/medulla.log`, calls flux_codec, writes all four contract files. Designed as a long-running daemon (1 Hz slow loop).
- `oscillation_target.json` — example / reference target file.
- `README.md` — module docs.

### v3 side — `ghojualamanchu-v3/integrations/openclaw/`
- `claw3d_emitter.py` — reads all four signal files, builds an OpenClaw-spec `agent_state` message, writes to `data/signals/claw3d_agent_state.json`, optionally POSTs to a Claw3D gateway.
- `claw3d_consumer.py` — reads the agent state, returns a human-readable narrative for the cortex / thalamus.
- `__init__.py` — package marker.

### Test
- `tests/test_openclaw_integration.py` — 12 unittest cases covering: agent state schema, target derivation, trit alignment, prescription routing, file persistence, consumer rendering. All passing.

## Architecture

```
ghojualamanchu-v3 (7.83 Hz medulla, EMF observer)
   │
   │  medulla.log  (INHALE/EXHALE/HOLD, beat count, enc_mod)
   ▼
[emf_tap.py] ── tail ──► v1/emf-events.log
   │
   │  data/signals/resonance_report.json   (aggregate_emf output)
   │  data/signals/oscillation_target.json (flux_codec output)
   │  data/signals/telemetry.json          (last cycle)
   │  data/signals/feedback_report.json    (alignment diff)
   ▼
[claw3d_emitter.py] ── build agent_state ──┐
                                            ├──► data/signals/claw3d_agent_state.json
                                            └──► Claw3D gateway (if CLAW3D_GATEWAY_URL set)
   ▲
[claw3d_consumer.py] ◄── narrative (cortex/thalamus)
   ▲
[oscillation_loop.py] ◄── tail v3/medulla.log (1 Hz, slow loop)
```

## Live Verification

```
=== procs ===
v1 medulla:    PID 597   7.83 Hz   beat 58,728,100+
v3 medulla:    PID 512   7.83 Hz   beat 1,000+
emf_tap:       PID 660   bridging v3→v1
oscillation:   PID 1699  tailing v3 log, 1 Hz slow loop

=== fresh agent state ===
beat=0 field=STIR phase=INHALE trit=0 mag=0.72 align=1.0 rx=attend
sources: cellular_band_850mhz, wifi_2.4ghz_b, fm_radio_88-108mhz, power_line_60hz_harmonics

=== tests ===
Ran 12 tests in 0.015s
OK
```

## Source URLs

- Claw3D repo: https://github.com/iamlukethedev/Claw3D (OpenClaw gateway, MIT, R3F+Drei+Phaser, Next.js Three.js, WebSockets)
- wemeanyounoharm.com/emf/: https://wemeanyounoharm.com/emf/ (ghojualamanchu Flash Build Theory, sprout's oscillation response, 9-brain ↔ hardware proprioceptive loop architecture)